The following sample essay on Determining the Molecular Weight of a Volatile Liquid. In today’s society, many products are designed to undergo many chemical reactions before the desired product(s) is created. This principle, also known as chemical synthesis, is an integral part in the operation of products such as an automobile airbag. Beginning with the releasing of nitrogen gas to inflate the bag and ending with the production of Na2SiO3 and K2SiO3, the airbag is an excellent example of how several chemical reactions can lead to the production of a few products essential for its operation.
Other multiple-step reactions, including the synthesis of anti-cancer drugs, demonstrate the importance of this principle. However, many problems such as the percent yield can arise and proper care must be taken in order to prevent any errors from occurring. The synthesis of copper is an example chemists use to demonstrate the law of conservation of mass. This law states that the mass of the products is equal to the mass of the reactants used.
The synthesis of copper is simply the production of copper metal through several chemical reactions.
These reactions can be summed up as the “Copper Cycle”. The copper cycle is a series of five chemical reactions, not including the removal of zinc, which begins and results with copper metal. The products (and subsequent reactants) of the copper cycle include copper nitrate, copper hydroxide, copper (oxide, copper sulphate, and copper metal. The production of each of these reactants is a result of the five chemical reactions, which are further explained in the procedure.
![](https://paperap.com/wp-content/themes/theme/img-rh/star.svg")
5 (876)
“ Have been using her for a while and please believe when I tell you, she never fail. Thanks Writer Lyla you are indeed awesome ”
During the copper cycle, several different types of chemical reactions occur. One type of chemical reaction that takes place in this cycle is known as a REDOX reaction. This reaction occurs when one element loses electrons (oxidizes), while another element gains them (reduces). Another type of reaction is known as a single displacement reaction. This reaction occurs when one element displaces another element, creating a new compound.
A similar reaction, a double displacement reaction, occurs when two compounds interchange elements and create two new compounds. The final reaction that occurs is known as a dehydration reaction. This reaction occurs when there is a loss of water from the reacting molecule. This can usually be caused by heating the solution. The purpose of this lab experiment was to recover as much of the initial mass of copper wire as possible after it undergoes the copper cycle. The value of the final mass of copper metal can help determine the percent yield (recovery) in comparison to the initial mass of copper.
The percent yield is calculated using the following formula: (Final Mass of Copper) /(Initial Mass of Copper) 100 = % Yield. This value will illustrate whether more copper was produced (% yield greater than 100) or consumed (% yield less than 100). In order to get the closest possible value to a 100% recovery, certain precautions must be taken. Any loss of copper due to spilling or being left behind in beakers must be avoided in order to achieve the best results. Procedure The experimental procedure used for this experiment was outlined in the CHEM 120L lab manual, under Experiment #1.
All steps were followed with no changes in the procedure. For this lab, the general objective was to recover as much of the initial amount of copper after it went through the copper cycle. In the first chemical reaction, the copper wire was dissolved in nitric acid and became copper nitrate. Since this reaction was performed under a fume hood, the NO2 gas was not detected. This was an example of a REDOX reaction, where an element gains electrons and another element loses electron.
In this specific reaction, copper metal lost electrons (became oxidized), while nitrogen gained electrons (became reduced). During the second reaction, sodium hydroxide was added to the newly created copper nitrate and the new product formed was calcium hydroxide. Unlike the first chemical reaction, this reaction was a double displacement reaction where the two compounds were interchanged to form new compounds. This reaction can also be classified as a precipitation reaction, where an insoluble product results from the reaction of two or more soluble reactants.
The newly created calcium hydroxide, which contained chunks of black precipitate, was then heated and copper oxide was created. This was done by adding heat, which means that this reaction can be classified as a dehydration reaction, where there was a loss of water in the reacting molecules. Following this reaction, copper (II) oxide was filtrated and, with the addition of sulphuric acid, the solution now had an aqua blue colour. This reaction was also a double displacement reaction. Finally, zinc metal was added to the copper sulphate solution, which resulted in a copper precipitate.
This final reaction was classified as a single displacement reaction, where zinc metal displaced the copper and became zinc sulphate. Before the copper was weighed, zinc was removed by the addition of hydrochloric acid and any excess water was removed by the addition of heat. Once again, a dehydration reaction occurs because of the loss of water. In the end, more copper metal was obtained after the copper cycle then the initial mass of copper wire. As shown in the calculation of the percent recovery, the final amount of copper produced was greater than that of the initial amount of copper.
As a result, the percent recovery was greater than 100% (130%). An error that accounted for this increase may have been that some of the excess water and/or zinc were not removed by heat and the hydrochloric acid, respectively. As a result, the final mass of copper recorded may have included a combination of water and/or zinc, along with the copper. Other incomplete reactions throughout the copper cycle may have also contributed to the increase in the final mass of copper metal. Questions During part 1 of this lab investigation, sodium hydroxide was added very slowly to the dissolved copper wire.
The reason why the sodium hydroxide was added slowly to the solution was that if the sodium hydroxide was added to quickly, the solution would react very quickly, producing lots of heat, resulting in gas and possible spills. This is a very dangerous safety hazard, as the sodium hydroxide must be handled with lots of precaution. One of the acids used in this experiment that must have been handled with precaution was the sulphuric acid. Sulphuric acid is highly corrosive, which means that any liquid splashes could cause very severe burns.
Therefore, eye and hand protection (i. e. goggles and gloves) must be worn at all times while this chemical is being handled. Proper ventilation must be given to this acid and any inhalation must be avoided. There were several terms in this experiment that must be clarified. A supernatant is a clear liquid that lies above a precipitate. Decant, or decanting, is the process of pouring out a liquid, with the intent of leaving some of the liquid behind. The third term, which is dissolution, is the act of going into a solution. Usually, it involves a chemical change from one form to an aqueous form. The final term, which is bumping, occurs because liquids do not boil in an even fashion (Saunder, 2004). As a result, the bubbles do not form right away, which could cause eruptions when the bubbles actually do form. This is why constant stirring of the solution is required in order to prevent any of these eruptions.
Determining the Molecular Weight of a Volatile Liquid. (2018, Jan 07). Retrieved from https://paperap.com/paper-on-12151-determining-molecular-weight-volatile-liquid/
